AL8P

GENERAL

Product Name	Linear Light
Product Model	AL8P
Product Category	Linear Light
Lamp Type	LED
Voltage	100-240VAC
Wattage	12W~24W/m
Lumen	960Lm~1920Lm/m
IP rating	IP40
Installation	surface mounted or Recessed
Ambient Tem. Range	-20 to 45 ℃
Application	Interior

ELECTRICAL DATA

Voltage	100-240VAC
Wattage	12W~24W/m
Insulation Rating	Class I
Dimmable	aviable
Dimming Protocol	0/10V or DAIL
Dimming Range	10% to 100%
Controls	On/Off
Sensor Type	NA
Switched	On/Off

STRUCTURE DATA

Body Material:	Aluminum
Trim Color	Aluminum color
Connection	Self-splicing

CERTIFICATIONS AND COMPLIANCE

Certificates

CE CB

OPTIC

Lumens	960Lm~1920Lm/m
Luniare Efficieny	80Lm/W
CRI	>85
Color Temperature	2700K/3000K/4000K
Beam Angle	100º

PHOTOMETRY



DIMENSIONS



Innovative interface. system



INSTALLATION 

1) Suspension installation


Step1:Remove the protective end cover.


Step2:Put the nail in the special chute.


Step3:Align the front and rear two pairs of joints with the corresponding sliding slot and slide in place.


Step4:Move the connecting fastening piece in the chute in advance to the middle of the two lamps and tighten the four fastening screws.

2) Recessed mounted


Step1: The wall is reserved for 1-2 mm larger than the pre-buried frame.


Step2: Put in the pre-buried frame .


Step3: Fixed with combined screws for installation of lamps and embedded frames.


Step4: Cover with an optical cover